• JustUseMint@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    8 months ago

    Do you have any advice for burning media to discs? I’ve plenty of media, and have Linux based media servers it sits on. Servers even have disc drives. Not sure if burn capable but just looking for general advice and best practices here

    • TimeNaan@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      8 months ago

      The slower the burn speed, the better. Less chances of error. Aside from that discs are kind of pointless in 2024 when you can have much cheaper, smaller and easier to use flash storage.

      Unless maybe you’re archiving something on special, heavy duty DVDs, otherwise why bother?

      • AlligatorBlizzard@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        4
        ·
        8 months ago

        Burning DVDs I’m not sure I get, CDs though? There’s still people driving cars that lack Bluetooth, and some people like listening to a whole album uninterrupted by phone distractions and there’s something nice about physical media - it makes sense for most of the reasons vinyl makes sense, it doesn’t, but it’s fun anyway.

        • TimeNaan@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          2
          ·
          8 months ago

          Most people with old car stereos these days use Bluetooth FM transcievers, I can’t imagine having to burn CDs and then fiddle with them while driving in 2024. It makes more sense to use physical media at home but in the car? I really don’t see the point.

          • yukichigai@kbin.socialOP
            link
            fedilink
            arrow-up
            4
            ·
            edit-2
            8 months ago

            Almost all FM transceivers that aren’t put inline with the actual car antenna are crap. FCC rules limit their broadcast strength severely and even crosstalk from an adjacent FM frequency can be enough to overpower them, or at least seriously disrupt them. Inline transmitters don’t have that problem, but at that point you have to pull the radio anyway so you may as well replace it with something that has bluetooth or at least an aux input.

            The only time an FM transmitter is a good solution is when you’re dealing with things like early 2000s Chevy vehicles, where part of the cruise control module is in the stereo. The best practice for replacing one of those stereos is “add a long wiring harness so you can keep the original stereo hooked up and stashed in the back, then wire the new stereo in to the actual speakers and nothing else.”