![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/d82718c7-5579-4676-8e2e-97b4188f10d3.png)
That would be an argument…IF it would be consistently 16 between each unit
Il leave this one here to see if it’s 16 every time: https://youtu.be/r7x-RGfd0Yk
Spoiler: it’s not!
That would be an argument…IF it would be consistently 16 between each unit
Il leave this one here to see if it’s 16 every time: https://youtu.be/r7x-RGfd0Yk
Spoiler: it’s not!
Same here, it’s totally sufficient and never saw the reason to “upgrade” to the free business nodes
I’m coding them down as plantuml network code and render them using a selfhosted plantuml Server.
In the end my whole admin guide resides in a obsidian notebook as markdown There is even a plugin that renders plantuml code within obsidian
The nice thing: everything is just code and can be moved to any other tool (had my documentation in a local gitlab repo, but I swapped gitlab out for gitea)
Yep, I went in this direction…until I gave in during a bare metal install of something…
Docker is not hassle free but usually most setup guides for apps are much much easier with docker
Worth a try, will try it when Im back home
I’ll try that one thanks
I changed the native vlan to ‘83’ and allowed all others
The isoöation is done with firewall rules blocking access from the IoT net to default, with some exceptions (dns, media nas (currently), etc.)
So if I understand this right you will need to change the network on the port attached to the synology in your UniFi configuration or set the vlan tag in the synology OS, I would do the former.
doesn’t the switch terminate any VLAN tagging at the port? so if I add the VLAN to the DSM configuration it doesn’t receive any tagged packages and refuses them?
It sounds like you just added a second network/vlan to the existing interface which means you actually created a trunk and are getting the old network untagged and the new network with vlan tags which the synology is dropping.
with all the other devices in the IoT subnet it works with setting the VLAN on the port of the switch. If I check back on the unifi site, I found this:
'Applying a VLAN to a Switch Port
Native VLAN
The Native VLAN is the VLAN assigned to "untagged" traffic passing through a switch port. Devices physically connected to a switch port will be placed on this Native VLAN.
Tagged Networks and Trunk Ports
Ports can be configured to allow traffic from other networks. Allowing specific networks/VLANs is referred to as “tagging” them on the switch port. You can see all ports’ VLAN tags in the VLAN Viewer, found in the Ports tab.
Ports that have been tagged to allow traffic from multiple VLANs are referred to as “trunk” ports. By default, all ports on UniFi Switches are trunked to allow all VLANs. '
if I understand that in combination with your comment correctly: I set the native VLAN to 83
so everything tagged with 83
is correctly forwarded to the NAS and accepted there, stuff tagged with 1
are non native, the tag stays on and the NAS doesn’t accept it?
But that would make the Synology NAS quite hard to use in any corporate setting with multiple VLANs which need to interconnect
and why does it work the other way around? while being in the default net 1
it does accept stuff from VLAN 83
Synology OS also doesn’t really support trunked ports through the UI (even though it does support a port that only uses a vlan tag) so it’s much easier to just leave them untagged.
which would mean, I can’t put it in the IoT net?
It’s normal for a switch to strip a vlan tag when it sends a packet out, so that the endpoint doesn’t have to support vlans. Don’t worry about that. As far as the endpoint is concerned, it’s just normal subnetting.
okay that’s what I thought
When it’s on the other vlan, can you even ping it? When you check the packet capture, can you see the ping and response? Where does it get dropped?
if I try to ping it it doesn’t answer, the unifi logs do show that the packages have been forwarded to the subnet. If I use netcat to open a port on the other device it receives the connection request, but the NAS doesn’t recognize it. Maybe I have to do some Wiresharking on a mirror port to see what exactly comes back, hoped I could get around it
I’m a bit hesitant to activate the tag in the DSM, as it states that it then needs a tagged counterpart to be reachable, and since all the other devices in this subnet aren’t tagged anymore (as the switch untags the vlan at the port)
Connect a laptop into the same subnet as your Nas (so same vlan and IP range/subnet) and connect to the nas. This either eliminates the NAS or the router from the equation
did that, the NAS is easily reachable from within the subnet it’s only a problem from another subnet
Yeah, they are more leanient with their customers than with their products…
Yeah our law teacher always stressed that there is a big difference between having a right and getting your right
Jake from the corridor crew did a video speculating what the reasoning is behind it: https://youtu.be/u2dIvUAd5QE?si=rC2Kg_c-hCy0niYF
Yeah, that’s why nobody does it that way, but that strawman you got there looks mighty fine…
Yes but forwarding data to 700+ third parties is not what I would see as “privacy valuing”
Even if you can disable it…
Definitely Sicily, they get wiped out in this plan… .
And didn’t make an IOS upgrade back in the days the iPhone waterproof? And another one enabled fast charging in the microwave oven…
Same here, just stumbled across this issue yesterday when I tried to restructure my network to use .local