![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/d82718c7-5579-4676-8e2e-97b4188f10d3.png)
Homophobic is just religious in this case. Meaning that “the boys” include all the women too.
Homophobic is just religious in this case. Meaning that “the boys” include all the women too.
OpenVPN connect on both. I load the .ovpn-file that is exported from the server and that’s it.
Personally I would have gone for OpenVPN access server on Debian. Fairly simple and well documented for those starting out.
I have used and worked with OpenVPN connect on android, PC and Mac.
By making a bridge in the opensense interfaces you have created a layer2 network. This means that all the devices connected on that network are broadcasting their Mac addresses and are added to the ARP table on the opensense. Since they all are on the same physical network and the same subnet, none of the traffic will ever hit the layer 3 rules on your opensense.
If you want opensense to handle the rules of the traffic you will need to put the devices on different subnets and separate clans. Create a gateway address for every vlan on the opensense and point your devices to the opensense as their gateway.
It also comes with a dyndns-client built in. Very useful for updating the address of the OpenVPN server.
Reset the AP to make sure it uses dhcp for its own ip and update firmware from unifi network after adopting the AP again.
Test it by swapping places of the access points to find out if the issue is related to the access points or something else.