Another tool is paperless ngx. Although it is a bit more than just a scanner Programm.

Reolink has always been a good choice. Very good hardware for the price and they support onvif on most devices, which you can then use however you like.

The fact that the ccc uses matrix as their official chat “app” doesn’t imply that it is inherently insecure I would say.

Try this one

https://play.google.com/store/apps/details?id=com.spocky.projengmenu&hl=de&gl=US

Been using it for a year now, really happy with it.

Yup, that’s it, at least from my understanding.

Care to back up the last statement about last pass being the most secure? I’m having a really hard time seeing lastpass as more secure than a local only password manager like keepass or KeePassXC.

Honestly, this reads like a PR post.

https://github.com/toverainc/willow

They even have a dedicated piece of hardware for it.

Yes and no. If your isp is still providing unencrypted DNS for you, then they can still see the domain name you’re visiting.

Look into vlan.

Basically allows you to have different subnets rubbing on a physical network card.

It is possible what you want to do and not that complicated.

Well, time to post that Tom scott video again I guess.

https://www.youtube.com/watch?v=-5wpm-gesOY&t=6

Man, Ryan Reynolds the lawyer is really entertaining. Thanks for posting the video, I thoroughly enjoyed it.

And here is hardware that works with home assistant.

https://heywillow.io/

Thanks for the link, that was an interesting read!

Alright, that makes it a bit easier. Any luck so far in debugging the problem?

I would start with the minimal setup. Connect one of the non working machines to just the the switch, just to rule out any other equipment. Test all ports with this PC. repeat with the other two. Where are the similarities? Is something different?

Also, the TL-SG105E is a managed switch. Connect it to the working PC and open the web interface. Default IP of the switch is 192.168.0.1 if there is no DHCP lease. Make sure the IP is not used twice in your setup. Make a fimrware update, make a factory reset on the switch.

Actually, two things went badly wrong here. The first is that Azure accepted an expired signing key, implying a vulnerability in whatever is supposed to check key validity. The second is that this key was supposed to remain in the the system’s Hardware Security Module—and not be in software. This implies a really serious breach of good security practice. The fact that Microsoft has not been forthcoming about the details of what happened tell me that the details are really bad.

Jesus fucking Christ… I really did not expect this from Microsoft I have to say. The first one is strange already but the second one? Really looking forward to their explanation of this cluster fuck…

Reolink ist the way to go. I think only the battery powered ones don’t have onvif. Otherwise the poe cameras all support onvif and are generally of very good quality. Plug it in and of you go. EDIT: Forgot to mention: You can configure the camera via the web interface, so no need for an app. I’m using the 820 at the moment, but I’m planning to get the new trackmix camera, these look really good.

Thanks. This definitely goes onto the pile of things I’ll build at the new house.

Not OP, but most people are using load sensors under the bed frame with an esp or raspberry.

Thanks, was about to post the same. I have no emotional attachment to signal, but I haven’t seen a real reason why I shouldn’t be using it anymore. At least from a security point of view. It works very reliably for years now and does most of the things i expect from it.