I have this device and use it to store my keepassxc and onlykey backups, and it’s useful to me because I’ve stopped using passwords (I only need to remember the pins for these devices which can unlock my keepass dbs that have everything else).

It seems secure enough for my use case, especially since the files I store in it are themselves encrypted (the onlykey backup still requires a pin), but I still want them to be difficult to access.

I’ve had to rely on it before but only because I didn’t prepare a backup onlykey ahead of time- ideally it should be one of many recovery methods. But so far it’s worked great for me.

Nice, sounds pretty cool. FZF is great, I need to try out some new things with it. Never got into snippets but I’m sure that speeds things up considerably, will think about it.

Yeah separate config files is probably the best approach if you have a lot of things configured. I haven’t done that yet, but might try soon. My config has generally been pretty simple, mostly bindings and plugin settings. But I started developing in the TTY and had to shoehorn-in a conditional theme and such to get it to work properly, leaving it pretty unorganized.

| I can never leave vim. It has taken over the pathways in my brain.

Haha, yeah

My neovim config is a total mess :D. But yeah i3-msg+jq is great, I’ve written a number of solutions to this problem before using the API and external scripts, but it’s nice having things inline in the config file

For a while I would have agreed, and I used sway for years. But recently I switched back to i3 (i3-rounded) due to display issues with my AMD GPU. I started doing most of my development in the TTY, and found that switching from TTY to Wayland takes half a second and can sometimes break my GPU (until I switch between TTY and display a few times). With X11 it’s instant and without issue ¯\_(ツ)_/¯. Hoping that gets fixed down the road, or that it’s specific to my GPU.

This is always the first thing I get set up:

# focus next available workspace on this output

bindsym $mod+q exec --no-startup-id ws=$(i3-msg -t get_workspaces | jq ‘.[] | select(.focused) | .num’) && ofs=$(i3-msg -t get_outputs | jq ‘map(select(.active)) | length’) && i3-msg workspace $(($ws-$ofs))

bindsym $mod+w exec --no-startup-id ws=$(i3-msg -t get_workspaces | jq ‘.[] | select(.focused) | .num’) && ofs=$(i3-msg -t get_outputs | jq ‘map(select(.active)) | length’) && i3-msg workspace $(($ws+$ofs))

# move window to next available workspace on this output

bindsym $mod+Shift+q exec --no-startup-id ws=$(i3-msg -t get_workspaces | jq ‘.[] | select(.focused) | .num’) && ofs=$(i3-msg -t get_outputs | jq ‘map(select(.active)) | length’) && dest=$(($ws-$ofs)) && i3-msg move workspace $dest && i3-msg workspace $dest

bindsym $mod+Shift+w exec --no-startup-id ws=$(i3-msg -t get_workspaces | jq ‘.[] | select(.focused) | .num’) && ofs=$(i3-msg -t get_outputs | jq ‘map(select(.active)) | length’) && dest=$(($ws+$ofs)) && i3-msg move workspace $dest && i3-msg workspace $dest

Works with sway if you replace i3-msg with swaymsg (and remove --no-startup-id, since it’s not needed for Wayland).

Edit: ampersand issues, trying quote instead of code block

I usually use Awk to do the heavy lifting within my Bash scripts (e.g. arg parsing, filtering, stream transformation), or I’ll embed a Node.JS script for anything more advanced. In some cases, I’ll use eval to process generated bash syntax, or I’ll pipe into sh (which can be a good way to set up multiprocessing). I’ve also wanted to try zx, but I generally just stick to inlining since it saves a dependency.

I started by writing small scripts to automate things, but really got into it after learning how fun it can be to make the computer do stuff. I also see it as a kind of creative outlet, but in general I just want to learn how to fix anything in software if I’m not satisfied with how it works.

I use LUKS-encrypted LVM volumes to store everything (and transfer via SSH or HTTPS), but would use GPG if I needed to encrypt individual files.

Ah good to know! Will try that if I ever run into issues, thanks

I’ve been using it for years and I think it’s great. Currently on a 6 Pro. It’s true that some apps don’t work without Google Play services, but GrapheneOS has the option to install the google stuff in a sandbox, so you shouldn’t run into any issues if you do that. Personally, I don’t use Play services unless I need to, and use Aurora store for any apps that aren’t on F-Droid.

In any case, you can always revert to stock or try another OS

Edit: as faede has pointed out, it appears that Google Wallet has issues. Also, the usage docs mention issues with banking apps in general, so that’s something to consider

Try going down the page and looking for the categories with more than a few bits of identifying information. I’m running LibreWolf with just uBlock Origin and Dark Reader (which I don’t think influences results) and I’m able to get nearly-unique, instead of unique (but I do get unique on default settings). TBB gets non-unique, which is a good set of results to compare to.

In my case I noticed that my fonts were really unique so I set browser.display.use_document_fonts = 0. Also I use my WM to set my page resolution to 1920x1080, which seems to have a better fingerprint than the default LibreWolf floating resolution of 1600x900 (and even the letterboxing resolutions, from what I can tell).

I just spent some time testing again and checking for anything else. RFP does force a generic user agent, but unfortunately it keeps the version information and I can’t figure out how to change it with RFP on. Would be nice to set it to the ESR version used by TBB (which has lower bits), but I’m not sure if that would lead to a more unique fingerprint (if, say, a feature was detected that is available in later versions but not ESR).

Edit: just tried Mullvad browser, and it’s non-unique! Might be the best option.

Was getting 71% on Librewolf with only uBlock Origin. Enabled every blocklist in the extension and am now getting 100%. Thanks for sharing!

Yep that was after make clean :). Running a 12-core Ryzen 9 that’s a few years old and 64GB RAM; using 24 threads does speed it up quite a lot.

Edit: to be sure, I completely removed the source directory and re-emerged gentoo-sources and got similar results

Great idea to use GPT for that! Been wanting to trim mine down for a while; will give it a shot.

With a decent CPU the kernel compiles pretty fast. I’m using a default configuration with modules disabled (compiled in) and various settings enabled/optimized for my hardware, and this is what I get:

make -j24

real 2m16.357s
user 38m36.133s
sys  4m26.449s

An extension would be cool! I’m currently trying to do something similar, in some sense; I’ve patched my instance to filter out DB results from public queries so that only my posts and comments are visible (unless I am logged in).

The only thing I’m not sure about yet is if it’s possible - if I create a Post on an instance that’s not my home, who is hosting the data? Do I only send ActivityPub Create Post with the data and the instance then saves it, or do I create the post on my own instance, send an ID, and if someone requests the Post data on the instance I posted to, it will be requested from mine?

I believe it might be possible, but I’m not sure. It seems that the protocol itself is mostly geared for synchronizing data and distributing updates. From my limited understanding, servers follow users or communities on other servers, which inform those servers that updates should be sent to the requesting inbox. These updates are then used to build up a local copy of the remote page. In the case of a remote community, users interact with their local copy and notify the remote community of those changes.

For example, I am viewing a local copy of this post that I received from lemmy.ml, and my reply to your comment will be stored locally. My server will notify lemmy.ml of this comment (including its contents), and lemmy.ml will notify my inbox if anyone interacts with it (because I am a follower).

It seems that at least some of this syncing might not be necessary… a lightweight frontend could rely on the API of each site it connects with to build up the activities it sends. However, this would probably cause some unnecessary traffic, as such a follower would both receive updates and query the API. Also it would probably break some things, such as ap_id (see the multicolored fedilink icon, which points the original copy of the content on my instance).

fl0w.cc- single user; the domain is meant to be part of my username :)