set it up once, never need to touch it again
I do computery stuff i guess.
Why did i choose this server? Mainly because shonk funni :)
set it up once, never need to touch it again
Smells a little like rage bait, doesn’t it?
For a charger you can use a TP4056 module, many of these have protection built-in. You can tell by them having two more small chips near the solder pads, and of those pads having 4, two for battery + and - , and two for whatever you are attaching that will be protected
you can usually find them by sth like tp4056 module with battery protection circuit
the ones with usb c usually are designed without the cc pulldown resistors and thus will usually only function with usb a to usb c cables
There are lots of resources online, for example bigclives videos.
This is the gist:
Depends on the kind of model, but usually you have two caps one one tube. If you take the one opposite to the mouthpiece out with a pair of plyers, you can usually slide the electronics out. Cut the wire at the battery and there you go. Just be careful: they usually are the pouch type, wich means its not that hard to squish, puncture or bend them, which might anger the spicy chemicals inside enough to have it ignite. Put them in the little plastic containers for photigraphic film rolls, pills, or something else rigid. Usually they have solder tabs that you can poke through the lid and bottom to connect to them. You can also solder some wire to these tabs instead.
Make sure to always follow safety precautiobs for small lithium cells, for example not heating it above 50°C. You might also want to add a cheap single li-ion cell protection PCB
You can repurpose them for low-power applications like wireless sensors. If you need more capacity, solder them in parallel, after making sure they are at the same voltage ±0.1V
I hate those disposable vapes with a passion, but hey at least i get free li-ion cells from my classmates empty ones
I am severely confused. Am i missing cobtext? Is this LLM generated?
There already is an addon called ClearURLs
goat with 4 eyes and tounge out blep
a shitload. 64000 if it were simple text only stuff with 1MB per book, 640 if it were 100MB chonkers full of images
i would just use tar and write a script 1990s style, but encryption support + multi-volume (tapes are LTO-2, so only 200GB uncompressed) won’t work with that
for me, opening my music folder in Picard (available for download at https://picard.musicbrainz.org/) and clicking “analyze” was enough
are you sure you are not mixing up MusicBrainz (the Metadata Database) with MuiscBrainz Picard (the tool to put metadata on files)
try musicbrainz picard for the metadata
i suggest a raspberry pi or similar single-board computer with either LibreELEC (good for local/NAS files or jellyfin) or a build of androidTV installed
Relevant video: https://youtu.be/V8silkw5Bh0?t=92
if you have swamp-like humidity, the coating prevents corrosion. if that is not an issue for you, it will do nothing. even if it were more conductive, audio signals are so low current, it wouldn’t make a difference
where is that image from?