I am planning to eventually build my own home server, and when I do I will hook it up via ethernet. But I do want to switch away from the generic FIOS router and use my own for more control over my data and security. Any recommendations?

      • vector_zero@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        This seems like it’s geared toward higher power hardware that’s not generally available on a consumer-grade router.

        • stown@sedd.it
          link
          fedilink
          English
          arrow-up
          7
          ·
          1 year ago

          You could buy a $300 consumer router and it would be worse than just using an old PC with OPNsense.

          • _TK@lemmy.antemeridiem.xyz
            link
            fedilink
            English
            arrow-up
            6
            ·
            1 year ago

            Except that the old PC is probably less efficient at a lower clock than an AR based consumer router. You’ll get more performance and features, but it will be more expensive to run.

            • stown@sedd.it
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I guess if you live in a place where electricity is super expensive this will matter. A good majority of self-hosted people don’t seem to care much as they have server racks full of old hardware.

    • thejoker8814@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Please don’t host a router on a Hypervisor VM. That does not benefit security. First of all a router is an integral part of the (home) network, therefore it should not be dependent on anything, like a hypervisor. You want to be able to replace or update your server/ hypervisor independently from each other, for example in 5 hrs your router might be still rocking all data, but you would want to upgrade your home server / hypervisor. Furthermore all those OpenWRT, PFsense, OpenSense kernel/ OS hardening is more effective on the hardware itself, especially all RAM/ Memory based security measures. Also if you truly want to be more secure, you use dedicated hardware for multiple reasons, performance is dedicated to only routing/ firewall processing (no other service/ VM can block or slow down packet processing), reducing the attack surface (less software, less attack surface), easier to update.