I used the debugger to examine this code but not understanding a couple areas.

  1. Why does the for loop repeat after it exits to print a new line? If it exits the loop, shouldn’t it be done with it?
  2. Why is n incremented and not i as stated with i++?

int main(void)
{
    int height = get_int("Height: ");

    draw(height);
}

void draw(int n)
{
    if (n <= 0)
    {
        return;
    }

    draw(n - 1);

    for (int i = 0; i < n; i++)
    {
        printf("#");
    }
    printf("\n");
}
  • Merwyn@sh.itjust.works
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    11 months ago

    You are looking at a recursive method, as you can see with the line draw(n-1) inside the draw(n) method. You can search for “recursive function” on internet for a better understanding.

    Basically, the method draw is called a first time n = a user input, but then this method call itself with n-1 until it reach 0. So you can think as if function draw(6) will call draw(5) and wait for it to return before continuing, draw(5) call draw(4), ect until draw(0) that return immediately.

    So then the order of execution will be draw(1) that print " #\n" and return, then draw(2) will proceed to print “##\n” and return, then draw(3), ect until draw(n).

    • milon@lemm.eeOP
      link
      fedilink
      arrow-up
      1
      ·
      11 months ago

      Right. I was aware it was recursion as stated in the title of my post. I had two questions specific to where the for loop returns after printing #.

      • Merwyn@sh.itjust.works
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        11 months ago

        Yes, as I wrote when the method draw(n=1) finish the for loop that print one “#”, this call of the method draw return. Then the process start again from the after the line draw(n-1) of the method draw(n=2), which execute the for loop to print “##” and return. Then again you come back to after the line draw(n-1) of inside the method draw(n=3), ect.

        You should keep in mind that everytime a draw(n-1) is called, the current method is “paused” until this call return.

        • milon@lemm.eeOP
          link
          fedilink
          arrow-up
          1
          ·
          11 months ago

          I see. I guess my understanding was that the recursion was over after the recursive call, but it’s actually for all the code in draw().

          • Merwyn@sh.itjust.works
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            11 months ago

            Yes, to better understand this you have to understand the “flow” of the program. Meaning the order at which the instructions are executed and not written.

            Here you have the flow of the program starting from n =3 until the recursion reach draw(0), note that none of the for loop have been executed yet. At this point it reach the first “return” instruction and go finish the call to draw(0).

            Then the flow go back to where it previously was: inside the draw(1) call just after the line calling draw(0). And it start executing the next lines of the draw(1): the for loop.

            Then it reach the second “return” and proceed again until the whole program is over.

            • milon@lemm.eeOP
              link
              fedilink
              arrow-up
              1
              ·
              11 months ago

              Yes, that helps. Thanks. I see now how n goes from 1 to 2 to 3…etc. Now not so sure how i = 1 when the for loop starts.

              • Merwyn@sh.itjust.works
                link
                fedilink
                arrow-up
                1
                ·
                11 months ago

                When called with n=1 ? It’s from i=0 to i<1, so it will do only one iteration with i=0 and print one #.